Skip to main content

Using the new D2A-AC forms on Nuj

How to use and lodge the new Connect templates of the old D2A forms

For the September 2026 quarter, APRA has provided two ways to lodge your former D2A quarterly forms:

  1. Continue submitting through the Alternative Submission Method you've used since D2A went offline

Here's how to lodge your 30 September 2026 quarterly D2A returns if you've picked (Option 2) the new APRA Connect forms. You will see each form as a separate line item in Nuj’s Reporting Manager with the prefix “(D2A-AC)”. You prepare and approve each form separately in Nuj, then you put them together and lodge them in APRA Connect yourself.

This only covers the former D2A forms. Your SDT forms aren't affected.

Overview instructions

  1. Split APRA's template into one file per form. APRA have provided one file with every form in it here. Make a copy for each form (SRF 160.1, SRF 320.0, SRF 330.0 and SRF 720.0) and delete the tabs you don't need. See step 2 below for instructions specific to SRF 160.1.

  2. Upload each file to Nuj. Each form shows up as its own item in Reporting Manager, so you validate, review and approve them one at a time, like you normally do.

  3. Combine the forms and lodge them in APRA Connect. Once they're all approved, you combine them into two files, one for return 4450 and one for return 4330, and upload both to APRA Connect. Both returns are due on 28 October 2026.

Note: SRF 533.0 will continue to ONLY be lodged via the Alternative Submission Method, as it is currently under consultation with APRA.

Part 1: Preparing your forms in Nuj

Step 1: Download APRA's files

Grab the upload template and the taxonomy from APRA's D2A migration page. The template has all the forms in one file. Although the taxonomy file looks like the ones used for the existing taxonomy files that are uploaded for SDT forms, don’t use it for uploading files to Nuj or APRA Connect. Only use the upload template for this purpose.

Step 2: Make one file per form

Save a copy of the template for each form. In each copy, delete every tab that isn't for that form. Keep the form's main tab and its open table tabs. E.g. for SRF 320.0. that's SRF_320_0.1, SRF_320_0.Table10.1 and SRF_320_0.Table22.1.

SRF 160.1 is a single item in Nuj, so keep it as one file with both the whole-fund tabs (SLO_BKS) and the sub-fund tabs (SUBF). You'll split them up later in Part 2, because APRA Connect wants them in different returns.

Step 3: Fill in the green cells

Only type in the green cells. Grey cells are locked, and yellow cells point you to the tab where an open table lives. The reference section at the end of this page explains the colours, the header fields and how to copy tabs for each sub-fund.

Step 4: Upload, validate, review and approve

Upload each file to Nuj as its own item in Reporting Manager, then validate, review and approve it as usual.

You will see each form as a separate line item in Nuj’s Reporting Manager with the prefix “(D2A-AC)”

Note: as you upload each file into Nuj, you may be asked to choose which Form, Fund, and Frequency you’re uploading for. This is because APRA has removed the entity details sheet from the upload template and has largely locked down the header information so this information is no longer in the file.

Because every form is separate, different people can work on different forms at the same time.

Part 2: Lodging in APRA Connect

APRA Connect has set up its D2A returns to be submitted in 2 grouped form bundles 4450, and 4330. Once every form is approved in Nuj, you need to put them back together to match APRA's two quarterly returns.

Return

Forms in it

Who lodges it

4450 Superannuation Quarterly Return (RSE)

SRF 320.0 and SRF 330.0

All RSEs, PSTs and ERFs

SRF 720.0

RSEs with total assets of $200 million or more at the end of the most recent year of income

SRF 160.1, whole fund only

Defined benefit RSEs

4330 Defined Benefit Member Flows Quarterly Return (DB sub fund)

SRF 160.1, one entry per sub-fund

Defined benefit RSEs with sub-funds

APRA lists every return and its forms in its return and form information spreadsheet.

Step 1: Combine your approved forms

Once all your returns have been validated, reviewed, and approved in Nuj, download the final copy of each individual file. Copy the tabs from each approved file into one workbook per return.

  • 4450 file: the tabs for SRF 320.0, 330.0 and 720.0 (if it applies to you), plus the (SLO_BKS) tabs from your SRF 160.1 file if you're a defined benefit fund.

  • 4330 file: the (SUBF) tabs from the same SRF 160.1 file, one numbered set for each sub-fund.

Watch out: sub-fund entries for SRF 160.1 belong in 4330, not 4450. APRA Connect rejects them if you put them in 4450.

Step 2: Find your returns in APRA Connect

The new D2A returns are easy to miss in APRA Connect's long list. Click the Reference column heading to sort it. Your D2A returns will be under "D2A..." once APRA has allocated them.

Step 3: Upload each return and check the results

Upload the 4450 file to the 4450 return, then the 4330 file to the 4330 return. APRA Connect validates as soon as you upload, so you'll see the results straight away.

Step 4: Submit by 28 October 2026

Both returns are due 28 days after the end of the quarter, same as before.


Reference: how the template works

How it's laid out

  • Every form has a main tab. For example, SRF_320_0.1 is the main tab for SRF 320.0.

  • Every open table has its own tab, linked to the main tab by its name. SRF 320.0 has SRF_320_0.Table10.1 and SRF_320_0.Table22.1.

  • There's no entity details tab, unlike the SDT templates.

  • You don't fill in the old header information. APRA Connect fills it in from the return you're lodging, and you can't change it. The one exception is Reporting Consolidation on sub-fund and product tabs (see below).

Cell colours

Colour

What it means

Green

Editable. Enter your data here.

Grey

Locked. Header information and values APRA Connect calculates.

Yellow

Open table. The cell tells you which tab to complete the table on.

Forms with a copy for each sub-fund or product

Some forms are lodged once for every sub-fund or product, like each defined benefit sub-fund or MySuper product. For these, copy the form's main tab and its open table tabs once for each one, and number the copies (1), (2), (3) and so on. Every tab for the same sub-fund needs the same number.

The template uses (SUBF) for defined benefit sub-funds, (MYSU) for MySuper products and (MSIO) for MySuper investment options.

Here's SRF 160.1 as an example:

Tab name

What it is

SRF_160_1.1(SLO_BKS)

Main tab for the whole fund ("Solo Books")

SRF_160_1.Table3.1(SLO_BKS)

An open table for the whole fund

SRF_160_1.1(SUBF) (1)

Main tab for the first sub-fund

SRF_160_1.Table3.1(SUBF) (1)

The same open table for the first sub-fund

SRF_160_1.1(SUBF) (2)

Main tab for the second sub-fund (a copy you add)

SRF_160_1.Table3.1(SUBF) (2)

The same open table for the second sub-fund (a copy you add)

The whole fund and the sub-funds go in different returns (see Part 2). The (SLO_BKS) tabs go in your 4450 file and the (SUBF) tabs go in your 4330 file.

Reporting Consolidation

  • Whole fund tabs: locked to "Solo Books".

  • Sub-fund or product tabs: type in the identifier for that sub-fund or product. It has to match the identifier registered for your fund, and the one you've used in D2A returns before.

  • Open table tabs: no header. They pick up their Reporting Consolidation from the main tab with the same number.

Validation

APRA Connect checks your data as soon as you upload, using the rules in the taxonomy. You see the results straight away.

  • Errors: you have to fix these before you can submit.

  • Warnings: you need to explain these.

Things that can catch you out

  • Missing forms count as nil. APRA Connect checks the whole return, not just what you upload. If a form belongs in the return but isn't in your file, it's treated as nil, and you may get "should not be $nil" Warnings. Make sure every form for the return is in the file.

  • Blank cells count as nil too.

  • Some Warnings might look wrong. A few APRA rules seem to run in the wrong quarter, so you might see Warnings on SRF 320.0 (total reserves movement) and SRF 330.0 (successor fund transfers in) that don't match your data. We've told APRA. If one doesn't make sense, say so when you explain it, and let us know.

  • You may see more movement Warnings than usual. SRF 320.0 compares some movements with your last eight quarters. APRA Connect treats a missing quarter as 0, so if you don't have much history in APRA Connect yet, expect a few extra Warnings.

Quick checklist

  • Download the upload template and taxonomy from APRA

  • Make one file per form and delete the tabs you don't need (SRF 160.1 stays as one file)

  • Copy the SRF 160.1 tabs for each sub-fund, numbered (1), (2), (3), and enter each identifier in Reporting Consolidation

  • Upload each file to Nuj, then validate, review and approve it

  • Combine the approved forms into a 4450 file and a 4330 file, splitting SRF 160.1 into its (SLO_BKS) and (SUBF) tabs

  • Upload each return to APRA Connect, fix all Errors and explain all Warnings

  • Lodge SRF 533.0 the interim way i.e. the same as last quarter

  • Get all returns in by 28 October 2026

Where to get help

Sources

Did this answer your question?